Epoxy Floors & Garage Floor Coatings in Fort Myers, FL
Flake, metallic and quartz epoxy floors, polyaspartic coatings and exterior systems for Southwest Florida homes, installed by a locally owned Fort Myers team.
Request a Free Quote & Consultation
Your garage floor gets more abuse than any other floor in the house, and bare concrete shows it: oil spots, tire marks, dust that never stops and cracks that keep spreading. Seaside Coatings turns that concrete into a sealed, finished floor that's easy to clean and good to look at. We're based at 5760 Youngquist Rd in Fort Myers, and we coat garages, lanais, pool decks and other residential concrete across Southwest Florida.
What to know before you call:
- Price: Most two-car garage floor coatings start around $2,400, and your exact price depends on size, concrete condition and the system you choose.
- Drive-on time is typically about 24 hours.
- Guarantee: Lifetime guarantee on covered floors and a 10-year guarantee on uncovered floors (residential floors only).
- Free estimates, in person (our preference) or virtual.
- Financing through Acorn Finance.
- 126 Google reviews at 5.0 stars. Locally owned and operated in Southwest Florida.
Choose Your Epoxy Floor System
Every system we install starts with the same careful prep. What changes is the finish on top and where it works best. Here's how the options compare:
| System | What it looks like | Often chosen for |
|---|---|---|
| Flake epoxy | Speckled, textured, many color blends | Two- and three-car garages, workshops |
| Metallic epoxy | Glossy, swirled, marble-like depth | Showpiece garages, home gyms, bonus rooms |
| Quartz | Fine texture from colored quartz granules | Areas that get wet or need more grip |
| Polyaspartic | A clear coating, a different chemistry from epoxy | The typical topcoat on our residential garage floors |
| Seaside Shield | Our exterior system | Pool decks, lanais, patios, driveways |
Flake epoxy floors
Flake is our most requested garage finish. After the base coat goes down, we broadcast colored flakes across the wet surface, then seal everything under a clear topcoat. You choose the blend, from light grays that brighten a garage to darker mixes that hide dirt, and how dense the coverage is. Full-coverage flake hides small imperfections in the slab and gives the floor texture underfoot.
Metallic epoxy floors
Metallic pigments mixed into the epoxy move and settle as the coating levels out, so the floor cures with swirls, depth and a high gloss. Every metallic floor comes out a little different. It's a decorative choice for a garage you want to show off, a home gym or an indoor room with a concrete slab.
Quartz floors
Quartz systems broadcast colored quartz granules into the coating and seal them under a clear coat. The result has a finer texture than flake and more grip, which is why quartz is often picked for spaces that get wet or see lots of foot traffic.
Polyaspartic coatings
Polyaspartic is a separate coating chemistry from epoxy, and it's the typical topcoat on the residential garage floors we install. It's the clear layer that seals the flake and gives the floor its finished look. Many Florida homeowners ask about it for sunny garages and outdoor areas, and we'll walk you through the full system for your floor at the estimate. For the full comparison, read epoxy vs. polyaspartic floor coatings.
Seaside Shield for outdoor floors
Seaside Shield is our extremely durable exterior floor coating system for uncovered outdoor floors like pool decks, lanais, patios and driveways. It's the system we recommend when a floor sits out in the sun and rain. Ideas for outdoor spaces: refreshing a pool area with a coating.
Floors We Coat Around the House
- Garages of every size, one-car to three-car and larger, including entry steps and stair landings.
- Covered lanais and outdoor kitchens under a roof.
- Pool decks, patios and driveways with Seaside Shield.
- Home gyms, workshops and hobby spaces that need a floor you can sweep and mop.
- Indoor concrete rooms where a metallic finish makes a statement.
Live in a condo or an HOA community? We've also coated condo building floors and HOA pool decks for associations. See our commercial epoxy flooring page.
Signs Your Garage Floor Is Ready for a Coating
Not sure it's time? These are the most common signs:
- The concrete is stained with oil, rust or tire marks that won't scrub out.
- Dust keeps coming back on the car, the shelves and everything stored on the floor.
- An old DIY kit or painted floor is peeling, especially where tires sit.
- Cracks and pitting make the floor look worn out.
- You're selling, or just moved in, and the garage is the one room that still looks unfinished.
- The garage is doing more as a gym, workshop or hangout, and bare concrete isn't cutting it.
Southwest Florida doesn't make it easier. Heat, humidity, summer storms and sand tracked in from the beach all wear on bare concrete. A sealed floor is simpler to sweep, mop or hose off, and it stops the dust at the source.
How We Prep and Install Your Floor
A coating is only as good as the concrete under it, so most of the work happens before any color goes down.
- Inspect. We look at the slab for cracks, damage, stains and any old coating.
- Repair. We repair cracks and damaged spots so the new floor goes down over a sound surface.
- Grind. We grind the concrete to open up the surface and give the coating something to bond to.
- Remove failing coatings. Peeling paint or an old DIY kit comes off first, because a new coating can only hold as well as what's under it.
- Base coat. The base coat goes down over the clean, prepared slab.
- Flake, if you chose it. Flakes are broadcast into the base coat.
- Clear topcoat. A clear topcoat, typically polyaspartic on our residential garage floors, seals the floor and gives it its final look.
Drive-on time is typically about 24 hours, and we'll leave care instructions for your system.
See Our Epoxy Floor Work
Browse more finished floors in our project gallery.
Want to hear from our customers? Read our Google reviews: 5.0 stars from 126 reviews.
What Does an Epoxy Garage Floor Cost in Fort Myers?
Most two-car garage floor coatings start around $2,400, and your exact price depends on size, concrete condition and the system you choose. The main things that move the number:
- Size. One-car, two-car and three-car garages are priced to the square footage.
- Concrete condition. Cracks, pitting and stains can add repair time.
- Old coatings. Removing a failing coating adds prep.
- System and finish. Flake, metallic, quartz and exterior systems are priced differently.
You'll get a written price after your free estimate, so there's no guessing.
Guarantee and Financing
Guarantee: Lifetime guarantee on covered floors and a 10-year guarantee on uncovered floors (residential floors only). Covered floors are garages and other floors under a roof. Uncovered floors are pool decks, patios and driveways.
Financing: Financing is available through Acorn Finance if you'd like to spread out the cost.
Serving Fort Myers and Southwest Florida
Fort Myers is home base, and we coat floors for homeowners across the region. Find local details on our pages for Bonita Springs, Estero, Naples and Cape Coral. Business owners and associations can see our commercial epoxy flooring page for hangars, mechanic shops, condo buildings and HOA pool decks.
Seaside Coatings Online Reviews
Why Southwest Florida Trusts Seaside Coatings for Epoxy Floors and Coatings
Residential Epoxy Floor FAQ
Can you coat over my existing garage floor coating?
It depends on its condition. Peeling or failing coatings come off before a new system goes down, because a new coating can only hold as well as the layer under it. Your estimate will spell out exactly what prep your floor needs.
Which system is best for a garage?
Flake epoxy is the most common choice for garages because it hides dust and tire marks and adds texture. Metallic suits a showpiece garage or gym, and quartz is a good fit where floors get wet. We'll help you choose during your estimate.
Should I choose epoxy or polyaspartic for my garage?
Often you don't have to pick just one. Polyaspartic is the typical topcoat on the residential garage floors we install, sealing the flake or other finish underneath. We'll recommend a system that fits how much sun your garage gets and how you use it.
How long before I can park on my new floor?
Drive-on time is typically about 24 hours. We'll confirm the timing for your floor before we leave.
How do I take care of a coated garage floor?
Sweep it regularly and mop or hose it off when it needs it. A sealed floor doesn't soak up spills the way bare concrete does. We'll give you care instructions for your specific system.
Do you coat pool decks and patios too?
Yes. Seaside Shield is our extremely durable exterior floor coating system for uncovered outdoor floors like pool decks, lanais, patios and driveways. Lifetime guarantee on covered floors and a 10-year guarantee on uncovered floors (residential floors only).
Do you offer financing?
Yes. Financing is available through Acorn Finance. Ask about it when you request your estimate.
Are estimates free?
Yes. Use the quote form on this page or call (239) 476-0219, Monday through Saturday, 8 a.m. to 6 p.m. We prefer to see your floor in person, and virtual estimates are available.
More reading: epoxy garage floor FAQs · how long epoxy garage floors last in Fort Myers homes · epoxy vs. paint for a garage floor
Get a Free Epoxy Floor Estimate
Ready for a garage floor you don't have to apologize for? Tell us about your space and we'll take it from there. Estimates are free, most two-car garage floor coatings start around $2,400, and financing is available through Acorn Finance. Also planning a repaint? We do interior and exterior painting too.
Seaside Coatings · 5760 Youngquist Rd, Suite 1, Fort Myers, FL 33912 · Monday–Saturday, 8 a.m.–6 p.m. · Locally owned and operated in Southwest Florida.
